Инструкция для Hyundai H-VC1084

3

Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent the damage of the filter.

CAUTION:

 Never use the vacuum cleaner without the filters.

Vacuum cleaner assembling

Always remove the plug from the power supply before fitting or removing accessories.

Fitting flexible hose

Insert the flexible hose into the air inlet and press it until it clicks into proper position

Hose removing

To remove flexible hose from the vacuum cleaner, press the button situated on the flexible hose base, then pull to remove it from the attachment point.

Fitting telescopic tube and accessories

Extend the telescopic tube to the desired length by pressing the button.
Insert a flexible hose into the telescopic tube.
Fit a nozzle to the telescopic tube:

-  Floor brush is intended for cleaning bare floor and floor coverings.
-  Furniture/crevice nozzle - to clean corners and between cushions.

Instruction for use

Before using the appliance, unwind a sufficient length of the cord and insert the plug into the power supply. The yellow mark on the cord shows the ideal
cord length. Do not unwind the cord beyond the red mark.
Slide the power control regulator on the handle from position “

” to switch the unit on. To switch off slide it back.

You can adjust the vacuum cleaner power using the power control on handle. There are 4 power levels: 

. (minimal), 

. (medium),

.(normal), 

.(maximum)

-  increase power for cleaning bare floor.
-  decrease power for cleaning curtains, books, furniture, etc..

To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.

Advantages of your vacuum cleaner

Your vacuum cleaner is equipped with 6 step filtration system:
-  the constant cloth dust bag;
-  the motor protection filter established between the dust bag compartment and the engine of a vacuum cleaner;