Инструкция для Hyundai H-1623

4

Instruction manual

antenna.

•  Adjust the frequency by rotating the 

frequency regulator.

•  Use VOL regulator to adjust volume level.
•  To switch off the radio, slide AUTO/OFF/ON 

switch to OFF. The backlight will go off.

Alarm operation

Setting the alarm

•  In clock mode press MODE button; the 

word ALARM will be displayed.

•  Press repeatedly SET button to go to 

setting of parameters in following sequence: 
alarm hour => alarm minute => snooze period 
=> alarm sound. The selected parameter will 
blink meaning readiness for adjustment.

•  Press ADJ button to adjust the parameter 

up. Press C/F button to adjust the parameter 
down.

•  Press C/F button once to enable the alarm 

function. The bell icon will be displayed.

Built-in alarm sound

•  You can select 8 alarm sounds (including 

6 tunes and 2 simple beepers). To use the 
built-in alarm sound, turn VOL regulator to OFF 
until a click.

•  Set the alarm time. When the preset time 

comes, the alarm signal will start. To stop it 
press SET button, otherwise the alarm signal 
will be on for 1 minute, then stop automatically.

Radio/MP3 as alarm

 •  To use radio as alarm sound, adjust the 

volume of the radio, then slide AUTO/OFF/ON 
switch to OFF.

 •  Set the alarm time, then press MODE 

button to go to clock mode, and slide  AUTO/
OFF/ON switch to AUTO.

•  When the alarm signal is in operation, 

press SET button and slide AUTO/OFF/ON 
switch to OFF position to stop it.

•  If an MP3-player is connected to this unit 

and file playback is on, it will sound as alarm 

signal instead of radio when the alarm time 
comes.

Snooze

•  In alarm mode press C/F button until 

bell and Zz icons are displayed meaning the 
snooze mode is on.

•  Set the alarm time, then set the snooze 

period (1 - 60 minutes).

•  When the alarm signal is on, press ADJ, 

MODE or C/F button to stop it. Zz icon will blink 
showing that the snooze is in operation, and 
the alarm signal will repeat after the snooze 
period you had set (if you use radio as alarm 
signal, slide AUTO/OFF/ON to OFF, then again 
to AUTO).

•  To disable the snooze function, press SET 

button when the alarm is in operaton. The Zz 
icon will stop blinking.

Countdown timer

•  Press TIMER button to enable timer mode; 

the clock icon will be displayed.

•  Press repeatedly SET button to go to 

setting of parameters in following sequence: 
timer hour => timer minute => timer second. 
The selected parameter will blink meaning 
readiness for adjustment.

•  Press ADJ button to adjust the parameter 

up. Press C/F button to adjust the parameter 
down.

•  When the countdown time is set, turn VOL 

regulator to OFF until a click. Press TIMER 
button to start countdown. When the time 
elapses, the selected alarm signal will sound. 
To stop it, press MODE button.

•  While the countdown is in progress, you 

can press TIMER button to pause it. To resume 
countdown, press TIMER button again.

Maintenance and care

If necessary, clean the unit with a piece of 

cloth dampened with water only (be sure the 
power cord is disconnected). The unit shall not